Disabling Procedure
WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Refer to SIR Service Precautions .
- Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
- Turn OFF the ignition.
- Remove the key from the ignition switch.
- Remove the console accessory wiring junction block access hole cover.
- Remove the SIR Fuse.
- Remove the LH insulator panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages, and Console.
- Remove the connector position assurance (CPA) from the steering wheel module coil connector (1) located at the base of the steering column.
- Disconnect the steering wheel module coil connector (1).
IMPORTANT:
With the SIR Fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation, and does not indicate an SIR system malfunction.