Scrapping Procedure
WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
During the course of a vehicle's useful life, certain situations may arise which will require the disposal of a live and undeployed inflator module. Do not dispose a live and undeployed inflator module through normal disposal channels until the inflator module has been deployed. If scrapping a deployed dual stage inflator module, both stages must be energized. The following information covers the proper procedures for disposing of a live and undeployed inflator module. Do not deploy the inflator module in the following situations:
- After replacement of an inflator module under warranty - The inflator module may need to be returned undeployed to the manufacturer.
- If the vehicle is the subject of a product liability report, GM-1241, related to the SIR or seat belt system - When a vehicle is the subject of a product liability report, do not alter the SIR or seat belt system in any manner.
- If the vehicle is involved in a campaign affecting the inflator modules - Follow the instructions in the campaign service bulletin for proper SIR handling procedures.