Radio Setup: Notes
WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The Radio Setup option does not contain a submenu. Radio Setup will configure the following systems:
- Steering wheel controls
- Learn VIN
- DTCs
- Class 2 radio messages
The radio setup procedure will also clear the following messages:
- CAL
- CAL ERROR
- CALIBRATE
To setup a new radio for the vehicle, perform a VIN Relearn, located in the Special Functions section on the scan tool. Cycle the ignition when complete.
If the radio is not properly setup, the radio will display a locked message (LOC) or Calibrate.