LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Antilock Brake System And Traction Control System) >> Diagnostic Information and Procedures >> DTC C0161 >> Test Description

Test Description

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

The numbers below refer to the step numbers on the diagnostic table.

  1. 2:  This step checks if there is other DTCs that can cause the BPP failure.
  2. 4:  This step checks to see if the DTC will reset as current.
DTC C0161

Step Action Yes No
Schematic Reference: ABS Schematics 
Connector End View Reference: ABS Connector End Views  and Computer/Integrating Systems Connector End Views in Computer/Integrating Systems
1 Did you perform the Diagnostic System Check - Vehicle? Go to Step 2  Go to Diagnostic System Check - Vehicle in Vehicle DTC Information
2  Use the scan tool to display DTCs for the body control module (BCM).
Does the scan tool display DTC C0277 or C0278?		 Go to Diagnostic Trouble Code (DTC) List - Vehicle in Vehicle DTC Information Go to Step 3 
3
  1. Confirm that the brake pedal position (BPP) is adjusted to the correct position and perform the BPP calibration procedure. Refer to Brake Pedal Position Sensor Calibration in Lighting Systems.
  2. Operate the vehicle within the Conditions for Running the DTC as specified in the supporting text.
Does DTC C0161 reset?		 Go to Diagnostic Aids Go to Step 4 
4 
  1. Use the scan tool in order to clear the DTCs.
  2. Operate the vehicle within the Conditions for Running the DTC as specified in the supporting text.
Does the DTC reset?		 Go to Step 2  System OK
scientia non olet · About LEMON Manuals