Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Hold-Down Retainer Bolt | 25 N.m | 18 lb ft |
| Battery Tray Bracket Bolts | 16 N.m | 12 lb ft |
| Cable to Solenoid Nut | 12 N.m | 106 lb in |
| Drive Belt Idler Pulley Bolt | 50 N.m | 37 lb ft |
| Drive Belt Tensioner Bolt | 50 N.m | 37 lb ft |
| Flywheel Inspection Cover Bolt | 10 N.m | 89 lb in |
| Generator Bolt - 2.2L | 22 N.m | 16 lb ft |
| Generator Bolt/Stud | 50 N.m | 37 lb ft |
| Generator Bracket Bolt | 50 N.m | 37 lb ft |
| Generator Nut - 3.5L | 30 N.m | 22 lb ft |
| Generator Terminal Bolt - 2.2L | 20 N.m | 15 lb ft |
| Generator Terminal Nut - 3.5L | 17 N.m | 13 lb ft |
| Negative Battery Cable Bolt | 17 N.m | 13 lb ft |
| Positive Battery Cable Bolt | 17 N.m | 13 lb ft |
| Starter Bolt | 40 N.m | 30 lb ft |
| Starter Solenoid Battery Terminal Nut | 10 N.m | 89 lb in |
| Starter Solenoid S Terminal Nut | 5 N.m | 4 lb ft |