Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Throttle Body Attaching Bolts

Courtesy of GENERAL MOTORS CORP.

Inspect the throttle body gasket and replace if necessary.
Install the throttle body to the intake manifold.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the throttle body attaching bolts.
Tighten: Tighten the throttle body attaching bolts to 10 N.m (89 lb in).
Connect the throttle body harness connector.
Install the air cleaner resonator. Refer to Air Cleaner Outlet Resonator Replacement .