LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Disc Brake System) >> Repair Instructions >> Rear Disc Brake Hardware Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Brake Dust Caution .
    Fig 1: View Of Brake Caliper And Caliper Bracket
    GM178630Courtesy of GENERAL MOTORS CORP.
  1. Remove the brake caliper from the mounting bracket and support the brake caliper (2) with heavy mechanic's wire (1), or equivalent. It is not necessary to disconnect the hydraulic brake flexible hose from the caliper. Refer to Rear Brake Caliper Replacement .
    2. Fig 2: Exploded View Of Rear Brake Caliper Components
    GM176945Courtesy of GENERAL MOTORS CORP.
  2. Remove the brake pads (9, 10) from the brake caliper bracket (12).
  3. Remove the brake pad retainers (11) from the brake caliper bracket (12).
  4. Remove the brake caliper bracket (12). Refer to Rear Brake Caliper Bracket Replacement .
  5. Mount the brake caliper bracket (12) in a vise.
scientia non olet · About LEMON Manuals