LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Adjustable Pedal System) >> Repair Instructions >> Brake Pedal Adjustment Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the closeout panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages, and Console.
  2. Remove the steering wheel stub shaft bolt and position the steering wheel stub shaft away from the steering column in order to gain access to the brake pedal adjustment position sensor. Refer to Intermediate Steering Shaft Replacement in Steering Wheel and Column.
  3. Remove the electrical connector from the brake pedal adjustment position sensor.
    4. Fig 1: Removing/Installing Brake Pedal Adjustment Position Sensor
    GM1238864Courtesy of GENERAL MOTORS CORP.
  4. Remove the brake pedal adjustment position sensor.
scientia non olet · About LEMON Manuals