Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Lubricate the O-ring with clean engine oil before installation and replace the O-ring if necessary.

Fig 1: View Of CKP Sensor (7X)

Courtesy of GENERAL MOTORS CORP.

Install the CKP sensor.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the CKP sensor bolt.
Tighten: Tighten the bolt to 11 N.m (97 lb in).
Connect the CKP sensor electrical connector.
Lower the vehicle.
Perform the CKP system variation learn procedure. Refer to CKP System Variation Learn Procedure .