Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Mirror From Mounting Pad

Courtesy of GENERAL MOTORS CORP.

Install the mirror to the mounting pad.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Tighten the screw that retains the mirror base to the mounting pad.
Tighten: Tighten the mirror set screw to 2 N.m (18 lb in).
Install the rearview mirror wiring harness.

Fig 2: Removing Wiring Harness Cover

Courtesy of GENERAL MOTORS CORP.

Install the wiring harness cover.