LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Stationary Window System) >> Repair Instructions >> Ambient Air Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Fastener Retaining The Ambient Air Temperature Sensor
    GM1346676Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the ambient air temperature sensor.
  2. Position the ambient air temperature sensor to the front impact bar. Ensure that the locating tabs on the sensor are seated into the holes on the impact bar.
  3. Install the fastener to the ambient air temperature sensor.
    4. Fig 2: Releasing Lower Tab Retainers From Slots
    GM1219350Courtesy of GENERAL MOTORS CORP.
  4. Install the fascia grille. Refer to Fascia Grille Replacement in Bumpers.
  5. Close the hood.
scientia non olet · About LEMON Manuals