LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Body Front End) >> Repair Instructions >> Hood Latch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Hood Latch Release Cable
    GM624220Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The hood latch release cable must be connected to the hood latch support bracket.
  1. Install the hood latch release cable to the hood latch.
  2. Align the hood latch to the marks on the hood latch support bracket.
    3. Fig 2: Identifying Hood Latch Retaining Nuts
    GM624221Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the nuts to the hood latch.

    Tighten:  Tighten the hood latch nuts to 6 N.m (53 lb in).

  4. Adjust the hood, if required. Refer to Hood Adjustment .
  5. Close the hood.
scientia non olet · About LEMON Manuals