LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Body Front End) >> Repair Instructions >> Hood Hinge Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Hood Hinge To Fender Bolts
    GM617956Courtesy of GENERAL MOTORS CORP.
  1. Position the hood hinge to the fender.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the hood hinge to fender bolts.

    Tighten:  Tighten the hood hinge to fender bolts to 6 N.m (53 lb in).

  3. Install the hood. Refer to Hood Replacement .
  4. Install the hood assist rod. Refer to Assist Rod Replacement - Hood .
  5. Install the hood rear side seal. Refer to Seal Replacement - Hood Rear Side .
  6. Adjust the hood, as required. Refer to Hood Adjustment .
scientia non olet · About LEMON Manuals