Circuit Description

The crankshaft position (CKP) sensor is a 24X sensor. It provides 24 digital ON/OFF signals to the powertrain control module (PCM) per revolution of the crankshaft. This information is used by the PCM for ignition timing, fuel injector timing, misfire diagnostics, and tachometer display. The PCM supplies 12 volts to the sensor on the 12-volt reference circuit, and provides a ground on the low reference circuit. The CKP sensor provides signals to the PCM on the medium resolution engine speed signal circuit. The PCM monitors the CKP sensor for errors. If the PCM does not receive a signal from the CKP sensor, DTC P0335 sets.