Installation Procedure
- Install the XM digital radio receiver to the receiver bracket.
- Install the radio receiver nuts.
Tighten: Tighten the nuts to 4 N.m (35 lb in).
- Connect the electrical connectors and the antenna connectors to the XM radio receiver.
- Install the left I/P insulator. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel in Instrument Panel, Gages, and Console.
- Perform the setup procedure for the digital radio receiver. Refer to Digital Radio Receiver Programming and Setup .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.