Installation Procedure

Fig 1: Removing/Installing Cruise Control Switch

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the cruise control switch screws (2).
Tighten: Tighten the screws to 6 N.m (53 lb in).
Install the steering wheel rear trim cover screws (4).
Tighten: Tighten the screws to 6 N.m (53 lb in).

Fig 2: Identifying Cruise Control Switch Components

Courtesy of GENERAL MOTORS CORP.

Install the steering wheel electrical harness grounding screw (1).
Tighten: Tighten the screw to 6 N.m (53 lb in).
Attach the electrical harness connector retainer clip (2) to the steering wheel trim cover.
Install the steering wheel to the vehicle. Refer to Steering Wheel Replacement in Steering Wheel and Column.