BCM Inputs
- Flash to Pass
-
The scan tool displays ON/OFF. When the multifunction switch is placed on the FTP position, the scan tool will display ON.
- Hazard Switch Signal
-
The scan tool displays ON/OFF. When the hazard switch is placed in the ON position, the scan tool will display ON.
- Headlamp OFF Switch
-
The scan tool displays ON/OFF. When the headlamp switch is placed in the OFF position, the scan tool will display ON.
- High Beam Switch
-
The scan tool displays ON/OFF. When the headlamp dimmer switch is placed in the HIGH position, the scan tool will display ON.
- Interior Light Switch
-
The scan tool displays ON/OFF. When the interior light switch is placed in the DOME position, the scan tool will display ON.
- Interior Lights Power
-
The scan tool displays ON/OFF. When the interior lamps switch has voltage applied, the scan tool will display ON.
- Left Turn Signal
-
The scan tool displays ON/OFF. When the turn signal switch is placed in the LEFT turn position, the scan tool will display ON.
- Low Beam Switch
-
The scan tool displays ON/OFF. When the headlamp dimmer switch is placed in the LOW position, the scan tool will display ON.
- LR Door Open Switch
-
The scan tool displays ON/OFF. When the LR door is open, the scan tool will display ON.
- Park Brake Switch
-
The scan tool display ON/OFF. When the park brake is applied, the scan tool will display ON.
- Park Lamp Switch
-
The scan tool displays ON/OFF. When the headlamp switch is in the PARK position, the scan tool will display ON.
- RF Door Lock Switch
-
The scan tool displays ON/OFF. When the RF door is open, the scan tool will display ON.
- RR Door Open Switch
-
The scan tool displays ON/OFF. When the RR door is open, the scan tool will display ON.
- Right Turn Signal
-
The scan tool displays ON/OFF. When the turn signal switch is placed in the right turn position, the scan tool will display ON.