Serial Data Power Mode
On vehicles that have several control modules connected by serial data circuits, one module is the power mode master (PMM). On this vehicle, the PMM is the body control module (BCM). The PMM receives 3 discrete ignition switch signals to differentiate which power mode will be sent over the Serial Data circuits. The table below illustrates the state of these inputs in correspondence to the ignition switch position:
3-Wire Ignition Switch Table
| Ignition Switch Position | Ignition 1 | Ignition 3 | Crank | Power Mode Transmitted |
|---|---|---|---|---|
| Off | 0 | 0 | 0 | OFF/Awake or RAP |
| Start | 1 | 0 | 1 | Crank |
| Accessory | 0 | 1 | 0 | Accessory |
| Run | 1 | 1 | 0 | Run |