Installation Procedure
- Install the steering wheel to the steering column.
- Install a NEW steering wheel attachment nut.
Tighten: Tighten the steering wheel nut to 40 N.m (30 lb ft).
- If connect the electrical connectors.
- Install the SIR inflator module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
- Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.
IMPORTANT:
A new steering wheel attachment nut must be used.