Scan Tool Output Controls

Body Control Module (BCM)

Scan Tool Output Control	Additional Menu Selection(s)	Description
I/P Illumination Lamps	Output Control/Lamp Test	The IPC from 0-100% when you select INCREASE or DECREASE by 20% increments.
Key Minder	Output Control/Chime Test	The BCM turns the key in ignition reminder chime on when you select ON. The key in ignition reminder chime should stay on until commanded OFF.
Lights On Minder	Output Control/Chime Test	The BCM turns the lights on reminder chime on when you select ON. The lights on reminder chime should stay on until commanded OFF.
Occupant Restraint	Output Control/Chime Test	The BCM turns the fasten safety belt chime on when you select ON. The fasten safety belt chime should stay on until commanded OFF.

Instrument Panel Cluster (IPC)

Scan Tool Output Control	Additional Menu Selection(s)	Description
Lamp and Gauge Check	-	The IPC illuminates the following indicators when you select ON: ABS BRAKE Change Engine Oil Charge DRL Engine Coolant Temperature Fasten Safety Belt High Beam Liftgate Ajar Low Fuel Low Oil Pressure Low Coolant Level Low Traction Low Washer Fluid Level MIL Reduced Power (L81) Security Service Vehicle Soon Upshift Indicator (manual transmission) The IPC drives the following gages to maximum position when you select ON: Engine Coolant Temperature Gage Fuel Gage Speedometer Tachometer The indicators should stay illuminated and all gages remain at maximum until commanded OFF. When commanded OFF, the indicators should turn OFF and all gages should remain at the minimum position until the test is exited or commanded ON.

Scan Tool Output Control

Additional Menu Selection(s)

Description

Lamp and Gauge Check

The IPC illuminates the following indicators when you select ON:

ABS
BRAKE
Change Engine Oil
Charge
DRL
Engine Coolant Temperature
Fasten Safety Belt
High Beam
Liftgate Ajar
Low Fuel
Low Oil Pressure
Low Coolant Level
Low Traction
Low Washer Fluid Level
MIL
Reduced Power (L81)
Security
Service Vehicle Soon
Upshift Indicator (manual transmission)

The IPC drives the following gages to maximum position when you select ON:

Engine Coolant Temperature Gage
Fuel Gage
Speedometer
Tachometer

The indicators should stay illuminated and all gages remain at maximum until commanded OFF. When commanded OFF, the indicators should turn OFF and all gages should remain at the minimum position until the test is exited or commanded ON.