Removal Procedure
- Disconnect the negative battery cable.
- Disconnect the positive battery cable.
- Remove the fan control module by sliding up and off the bracket. Lay the module and the wiring out of the way.
- Remove the battery insulating cover.
- Remove the battery hold down/fan control module bracket.
- Remove the battery.
CAUTION:
Refer to Battery Disconnect Caution
in Cautions and Notices.
IMPORTANT:
It is not necessary to disconnect the fan control module wiring from the module.
CAUTION:
Do not tip the battery over a 45 degree angle or acid could spill causing serious personal injury.