Installation Procedure

Fig 1: Removing/Installing Quarter Window - Sedan

Courtesy of GENERAL MOTORS CORP.

Install a quarter window into the opening. Refer to Urethane Adhesive Installation of Bodyside Stationary Windows (Sedan) .

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the nuts to the quarter window.
Tighten: Tighten the nuts to 2 N.m (18 lb in).
Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
Install the rear upper garnish molding. Refer to Garnish Molding Replacement - Rear Upper in Interior Trim.
Raise the rear seat back.