LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Wipers System And Washer System) >> Repair Instructions >> Wiper Motor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Wiper Motor
    GM1235608Courtesy of GENERAL MOTORS CORP.
  1. Position the wiper motor to the wiper drive system module.
    2. NOTE: Refer to Fastener Notice .
  2. Install the wiper motor screws.

    Tighten:  Tighten the screws to 8 N.m (71 lb in).

  3. Install the wiper motor crank arm and crank arm nut.

    Tighten:  Tighten the screws to 25 N.m (18 lb ft).

  4. Install the wiper drive system module. Refer to Wiper Drive System Module Replacement .
  5. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
scientia non olet · About LEMON Manuals