Installation Procedure
WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
- Position the washer solvent container to the left frame rail.
- Install the washer solvent container screw.
Tighten: Tighten the screw to 10 N.m (89 lb in).
- Connect the washer pump electrical connector.
- Connect the washer pump hose.
- Install the front fender liner. Refer to Front Fender Liner Replacement .
- Fill the washer solvent container with washer solvent.
NOTE:
Refer to Fastener Notice
.