LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Ion Red Line >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel & Steering Column >> Repair Instructions >> Multifunction, Turn Signal Switch Replacement >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the multifunction turn signal switch to the steering column.

    Tighten:  Tighten the multifunction turn signal switch screws to 2 N.m (17 lb in).

    2. Fig 1: View Of Headlamp/Turn Signal Switch
    GM878308Courtesy of GENERAL MOTORS CORP.
  2. Connect the multifunction turn signal switch harness connector.
  3. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
scientia non olet · About LEMON Manuals