Installation Procedure
WARNING: This page is about a different car, the 2005 Pontiac Pursuit and 2005 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate a new O-ring with DEXRON III transmission fluid Saturn P/N 121019223.
- Install the new O-ring.
- Install the VSS assembly.
- Install the VSS retainer bolt.
Tighten: Tighten the bolt to 9 N.m (80 lb in).
- Connect the VSS connector to the VSS (2).
- Install the left front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.