LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Ion 1 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Automatic Transmission - Introduction & Repair Instructions) >> Repair Instructions >> Shift Control Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Pursuit and 2005 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the shift control to the vehicle.
  2. Connect the shift lock solenoid harness connector.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the shift control nuts.

    Tighten:  Tighten the shift control nuts to 25 N.m (18 lb ft).

    4. Fig 1: View Of Shift Control
    GM851244Courtesy of GENERAL MOTORS CORP.
  4. Connect the shift cable to the shift control assembly.
  5. Install the console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals