Installation Procedure
- Position the battery tray bracket and install the bolt to the top of the side rail (1).
Tighten: Tighten the battery tray bracket bolts to 15 N.m (11 lb ft).
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Install the lower battery tray bolt (3).
Tighten: Tighten the battery tray bolt to 15 N.m (11 lb ft).
- Lower the vehicle.
- Install the battery tray bolt behind the headlight.
Tighten: Tighten the bolt to 15 N.m (11 lb ft).
- Install the left headlight. Refer to Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement in Lighting Systems.
- Install the UHJB and nuts.
Tighten: Tighten the nuts to 12 N.m (106 lb in).
- Install the battery. Refer to Battery Replacement .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.