Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
in General Information.
- Remove the wheel and tire assembly. Refer to Tire and Wheel Removal and Installation
in Tires and Wheels.
Courtesy of GENERAL MOTORS CORP.
- Remove the control arm ball stud cotter pin. Discard the cotter pin.
- Loosen the ball stud nut until the nut is level with the top of the ball stud.
Courtesy of GENERAL MOTORS CORP.
- Using the J 43828
, separate the lower control arm from the steering knuckle.
- Remove the ball stud nut.
Courtesy of GENERAL MOTORS CORP.
- Remove the control arm-to-frame front bolt and nut. Discard the bolt and nut.
- Remove the control arm-to-frame rear bolts and nuts. Discard the bolts and nuts.
- Remove the control arm.