Removal Procedure
- Disable the SIR system. Refer to SIR Disabling and Enabling Zone 8 .
- Remove the console assembly. Refer to Console Replacement - Front Floor in Instrument Panel, Gages, and Console.
- Remove the retainers from the connector position assurance (CPA) and disconnect the electrical connectors.
- Remove the nuts and remove the SDM.
CAUTION:
Do not strike or jolt the inflatable restraint sensing and diagnostic module (SDM). Before applying power to the SDM, make sure that it is securely fastened with the arrow facing toward the front of the vehicle. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.