Electrical/Garage Shift Procedure

Perform a preliminary test before the road test in order to ensure that the electronic control inputs are operating properly. If you do not check the inputs before operating the transmission, you could misdiagnose a simple electrical condition as a major transmission condition.

A scan tool provides valuable information and must be used on the VT25-E transaxle for accurate diagnosis.

1. Ensure that the gear selector is in PARK (P) and set the parking brake.
2. Install the scan tool.
3. Start the engine.
4. Using the scan tool, the Transmission Scan Tool Data Definitions and the Transmission Scan Tool Data List, verify that the data parameters listed are present and functioning properly. Refer to Scan Tool Data Definitions and Scan Tool Data List .