LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Vue Base, 2.2 D, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 305 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Replacement (L61) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the generator and install the top bolts finger tight.
    Fig 1: View Of Generator To Engine Block Bolts (L61)
    GM946609Courtesy of GENERAL MOTORS CORP.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bottom bolts and tighten all the generator bolts.

    Tighten:  Tighten the generator-to-engine block bolts to 22 N.m (16 lb. ft.).

  3. Connect the electrical connections.

    Tighten:  Tighten the B+ cable-to-generator nut to 20 N.m (15 lb. ft.).

    4. IMPORTANT: Use the required accessory drive belt removal tool number J 44811  .
  4. Install the accessory drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 2.2L (L61).
  5. Install the throttle body air duct. Refer to Air Cleaner Intake Duct Replacement in Engine Controls - 2.2L (L61).
  6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .

    Tighten:  Tighten the battery terminal bolt to 17 N.m (13 lb. ft.).

  7. Reprogram the radio stations.
scientia non olet · About LEMON Manuals