LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Vue Base, 2.2 D, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 256 (Power Steering System) >> Repair Instructions >> Power Steering Pulley Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Power Steering Pump Pulley Bolts
    GM891786Courtesy of GENERAL MOTORS CORP.
  1. Align the power steering pulley to the pump hub while loosely installing the pulley bolts.
  2. Install the accessory drive belt.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Tighten the power steering pulley to pump bolts.

    Tighten:  Tighten the bolts to 20 N.m (15 lb ft).

    4. Fig 2: Removing/Installing Air Cleaner Assembly
    GM895973Courtesy of GENERAL MOTORS CORP.
  4. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls - 3.0L (L81).
scientia non olet · About LEMON Manuals