LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> Transmission >> Manual Transaxle - Mu3 >> Repair Instructions >> Backup Lamp Switch Replacement >> Removal Procedure

Removal Procedure

NOTE: When removing or installing the backup lamp switch, do not use an open end wrench. Use only a socket in order to avoid damage to the switch assembly.
  1. Remove the left front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  2. Disconnect the backup lamp connector.
  3. Remove the backup lamp switch assembly.
    4. Fig 1: View Of Backup Lamp Switch
    GM1381684Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals