LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> Transmission >> Manual Transaxle - Mu3 >> Repair Instructions >> Axle Seals Replacement >> Installation Procedure

Installation Procedure

  1. Use the SA9133T  to install a new seal. Ensure that the seal is seated flush to the outer bore area.
    2. Fig 1: Installing Axle Seal
    GM895455Courtesy of GENERAL MOTORS CORP.
  2. Install the wheel driveshaft or intermediate drive shaft. Refer to Wheel Drive Shaft Replacement or Intermediate Drive Shaft Replacement in Wheel Drive Shafts.
  3. Install the front tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals