Installation Procedure
- Install the right lower steering column cover.
- Install the left lower steering column cover and snap into the right cover.
- Raise the steering column adjusting handle to lock the steering column into place.
- Install the lower steering column cover screws.
Tighten: Tighten the lower steering column cover screws to 2 N.m (17 lb in).
- Install the upper steering column cover by guiding the soft closeout under the I/P Trim Panel and aligning the retaining fasteners with the lower covers.
- Push on the upper steering column cover to secure.
- Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.