LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Ignition Lock Cylinder Solenoid Replacement >> Installation Procedure

Installation Procedure

    IMPORTANT: Clean the solenoid and plunger with a lint free cloth prior to installation. Oil or debris may cause ignition lock cylinder solenoid malfunction.
  1. Install a new spring over the ignition lock cylinder solenoid plunger.
  2. Carefully install the new ignition lock cylinder solenoid over the plunger.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Seat the ignition lock cylinder solenoid on the lock cylinder case housing and install the screws.

    Tighten:  Tighten the screws to 2 N.m (17 lb in).

    4. Fig 1: View Of Ignition Lock Cylinder Solenoid
    GM854930Courtesy of GENERAL MOTORS CORP.
  4. Connect the lock cylinder solenoid harness connector.
    5. Fig 2: View Of Ignition Switch Harness Connector
    GM854934Courtesy of GENERAL MOTORS CORP.
  5. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  6. Check the operation of the ignition lock cylinder solenoid.
scientia non olet · About LEMON Manuals