Manual HVAC Torque Specifications
MANUAL HVAC TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Compressor Drain Plug | 12 (16) |
| Compressor Hose-To-Compressor Bolt | 15 (20) |
| Compressor Hose-To-Condenser Bolt | 15 (20) |
| Compressor Hose-To-Evaporator Hose Nut | 15 (20) |
| Compressor Mounting Bolts | 18 (25) |
| Evaporator Inlet Line-To-Condenser Bolt | 15 (20) |
| Evaporator Outlet Line-To-TXV Nut | 15 (20) |
| Instrument Panel Carrier Bolts | 18 (25) |
| INCH Lbs. (N.m) | |
| Air Conditioner Refrigerant Pressure Sensor | 44 (5) |
| Blower Motor Mounting Screws | 16 (1.8) |
| Blower Resister Mounting Screws | 16 (1.8) |
| Center Air Distribution Duct Retaining Screws | 22 (2.5) |
| Compressor Clutch Drive Plate Bolt | 106 (12) |
| Compressor Pressure Relief Valve | 62 (7) |
| Condenser Mounting Bolts | 88 (10) |
| Evaporator Inlet Line Clamp Nut | 88 (10) |
| Heater Core Cover Screws | 16 (1.8) |
| HVAC Cable Retaining Screw | 18 (2) |
| HVAC Control Assembly Screws | 22 (2.5) |
| HVAC Module Case Screws | 16 (1.8) |
| HVAC Module-To-Cross Vehicle Beam Mounting Bolts | 88 (10) |
| HVAC Module-To-Dash Panel Nuts | 88 (10) |
| Radio Screws | 22 (2.5) |
| Recirculation Actuator Screws | 16 (1.8) |
| Service Port Valve Core | 22 (2.5) |
| TXV-To-Evaporator Core Mounting Bolts | 62 (7) |