Installation Procedure
WARNING: This page is about a different car, the 2005 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the gasket surfaces. Mating surfaces should be clean and dry.
- Install the rear gasket cover.
- Install the rear cover and bolts.
Tighten: Tighten the rear cover bolts to 24 N.m (18 lb ft).
- Fill the transaxle to the proper fluid level. Refer to Transmission Fluid Replacement .
- Install the left front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.