Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

Install the lumbar unit to the lower portion of the seat back cross wire.

Fig 1: Twisting Lower Portion Of Lumbar Unit

Courtesy of GENERAL MOTORS CORP.

Position the lumbar unit to the upper portion of the cross wire. Using a flat-bladed tool, twist the lumbar unit over the cross wire assembly.

Fig 2: Twisting Upper Portion Of Lumbar Unit

Courtesy of GENERAL MOTORS CORP.

Compress the lumbar unit and connect the cable barrel end to the lumbar unit.

Fig 3: View Of Lumbar Cable End

Courtesy of GENERAL MOTORS CORP.

Adjust the lumbar unit to ensure proper operation.
Install the seat back pad and cover. Refer to Seat Back Cover and Pad Replacement - Front (Non-Fold Flat) or Seat Back Cover and Pad Replacement - Front (Fold Flat) .