LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Engine Mechanical) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Intake Manifold Removal

Intake Manifold Removal

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Never attempt to remove the intake manifold from a hot engine, allow the engine to cool to ambient temperature. The intake manifold is made of a composite plastic and can be damaged if it is removed when the engine is hot.
  1. Remove the manifold absolute pressure (MAP) sensor.
    2. Fig 1: View Of MAP Sensor
    GM1306516Courtesy of GENERAL MOTORS CORP.
  2. Remove the intake manifold retaining nuts and bolts.
    3. Fig 2: View Of Intake Manifold
    GM1339178Courtesy of GENERAL MOTORS CORP.
  3. Remove the intake manifold.
  4. Remove the intake manifold gasket. Discard the gasket.
scientia non olet · About LEMON Manuals