Installation Procedure
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear window into the opening. Refer to Adhesive Installation of Stationary Windows (Windshield) or Adhesive Installation of Stationary Windows (Quarter) .
- Connect the rear window defogger electrical connectors.
- Install the rear window radio antenna connector.
- Connect the OnStar® antenna, if equipped.
- Check the radio and OnStar® system to verify reception.
- Close the rear compartment lid.
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.