LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Lighting Systems) >> Repair Instructions >> Reading Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the reading lamp back plate on the headliner.
  2. Turn the back plate until the tabs engage.
  3. Fig 1: Disengaging Lamp Assembly Back Plate
    GM888276Courtesy of GENERAL MOTORS CORP.
  4. Connect the electrical harness.
  5. Slide the lamp assembly cover forward to engage the hooks.
  6. Fig 2: View Of Reading Lamp Cover
    GM888295Courtesy of GENERAL MOTORS CORP.
  7. Push up on the rearward end of the cover in order to seat the cover clips.
  8. Fig 3: Installing Reading Lamp Cover
    GM888267Courtesy of GENERAL MOTORS CORP.
  9. Install the headliner. Refer to Headliner Replacement (w/ Sunroof) or Headliner Replacement (w/o Sunroof) .
  10. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 2 (Coupe) or SIR Disabling and Enabling Zone 2 (Sedan) and SIR Disabling and Enabling Zone 6 (Coupe) or SIR Disabling and Enabling Zone 6 (Sedan) in SIR.