LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Lighting Systems) >> Repair Instructions >> Door Jamb Switch Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector (1) to the door jamb switch.
  2. Press inward on the door jamb switch (2) until fully seated in the hinge pillar.
    3. Fig 1: View Of Door Jam Switch & Electrical Connector
    GM384957Courtesy of GENERAL MOTORS CORP.
  3. Install the lower garnish molding to the center pillar. Refer to Garnish Molding Replacement - Center Pillar Lower .
  4. Close the rear door.
scientia non olet · About LEMON Manuals