LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Engine Controls And Fuel - 2.2L - Introduction (2 Of 2)) >> Repair Instructions >> Spark Plug Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion 3 and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Gap the spark plug, using round wire type spark plug gap gage.

    Gap:  Adjust the spark plug gap to 1.14 mm (0.045 in).

  2. Fig 1: View Of Spark Plugs
    GM465982Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: DO NOT coat the spark plugs with anti seize compound.
    NOTE: Refer to Fastener Notice .
  3. Install the spark plugs with a spark plug socket.

    Tighten:  Tighten the spark plugs to 20 N.m (15 lb ft).

  4. Install the ignition coil(s). Refer to Ignition Coil Replacement .