LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Rear Suspension System) >> Repair Instructions >> Spring Bumper Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Upper Spring Seat/Jounce Bumper
    GM855055Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The rear springs are indexed with the colored tag toward the rear of the vehicle. No up/down or side to side orientation is required.
  1. Install the upper spring seat/jounce bumper on the spring.
  2. Fig 2: View Of Coil Spring
    GM855051Courtesy of GENERAL MOTORS CORP.
  3. Raise the rear axle in order to seat rear spring. Refer to Coil Spring Replacement .
  4. Lower the vehicle.