Installation Procedure
- Position the generator on the engine.
- Install the generator bolts.
Tighten: Tighten the generator bolts to 22 N.m (16 lb ft).
- Connect the positive battery harness to the generator battery terminal.
Tighten: Tighten the generator terminal nut to 20 N.m (15 lb ft).
- Connect the generator harness connectors.
- Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement in Engine Controls - 2.2L (L61).
- Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 2.2L (L61).
- Connect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
NOTE:
Refer to Fastener Notice in Cautions and Notices.