LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Splash Shield Replacement - Engine >> Installation Procedure

Installation Procedure

  1. Install the engine splash shield by inserting the push-in retainers.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the air cleaner intake duct bolt.

    Tighten:  Tighten the bolt to 10 N.m (88 lb in).

    3. Fig 1: View Of Engine Splash Shield & Retainers
    GM851684Courtesy of GENERAL MOTORS CORP.
  3. Install the front fender liner. Refer to Front Fender Liner Replacement .
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals