LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Hood Replacement >> Installation Procedure

Installation Procedure

  1. With an assistant, position the hood to the hinges.
  2. Align the hood hinges to the alignment marks on the hood.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the bolts that secure the hinge to the hood.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

    4. Fig 1: View Of Hood Hinge To Hood Bolt
    GM867790Courtesy of GENERAL MOTORS CORP.
  4. Install the hood insulator, if equipped. Refer to Hood Insulator Replacement .
  5. Adjust the hood. Refer to Hood Adjustment .
  6. Remove the protective covering from the fenders.
  7. Remove the support and close the hood.
scientia non olet · About LEMON Manuals