LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion 1 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Engine Mechanical) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Flywheel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the flywheel on the crankshaft as previously noted.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the flywheel bolts.

    Tighten:  Tighten the flywheel bolts to 53 N.m (39 lb ft) plus 25 degrees.

    3. Fig 1: Identifying Flywheel & Retaining Bolts
    GM412117Courtesy of GENERAL MOTORS CORP.
  3. Install the transmission. Refer to Transmission Replacement in Manual Transmission - MU3.
scientia non olet · About LEMON Manuals